Updated Software for VIAVI SmartOTDR & T-BERD/MTS Instruments (Oct 2019 release)

Posted on

VIAVI have just released updated software for the SmartOTDR, T-BERD/MTS-2000, -4000 V2, -5800 V2, -6000A V2 and -8000 V2. These latest software versions include test options and feature enhancements to enable network tests at new speeds and with new capabilities that make testing faster and more efficient. The releases include a number of usability enhancements, these are the main new functional additions:

New base unit functionalities (all units)

  • Improved lock marker capability

New base unit functionalities (SmartOTDR, T-BERD/MTS-2000 V2, -4000 V2)

  • GPS receiver support (requires VIAVI GPS dongle) – allows GPS data to be included with test results validating exactly where a test was performed and driving tech/contractor test compliance

New base unit functionalities (T-BERD/MTS-4000 V2 only)

  • Job Manager function – improves the testing and reporting workflow while minimizing the chance of tests being omitted and driving tech/contractor compliance – allows the import of a predefined job list and associated testing tasks (e.g. inspection, OTDR, or continuity check) and bundling of all test results into a single job numbered folder with a one button click summary report generation and one button click upload to StrataSync

New base unit functionalities (T-BERD/MTS-6000A V2, -8000V2)

  • Support for the new C-band DWDM OTDR module – allowing techs to perform complete end-to-end link characterization and troubleshooting through the optical MUX/deMUX, plus testing new DWDM wavelength routes and pinpointing exact fault locations without disrupting traffic on active channels in DWDM and hybrid CWDM/DWDM networks.

New OTDR functionalities (all units)

  • Improved OTDR automatic measurement – on short distances found in access & wireless networks, as well as for PON configurations
  • Enhanced SmartTEST modes – quickly identify if the fiber link needs repair or rework in 10s with EXPRESS Mode and perform link commissioning for customer acceptance with CERTIFICATION Mode
  • FTTH-SLM Premium application support for un-balanced splitter – can automatically fully characterize PON that use unbalanced (or tapered) splitter elements so the same tool can test & certify existing centralized/distributed architectures and new un-balanced splitter ‘Tap’ architectures
  • FTTH-SLM Base application – cost effective OTDR application for basic PON architectures

New OTDR functionalities (T-BERD/MTS-2000 V2, -4000 V2)

  • OTDR loopback test function – allows bi-directional testing with a single OTDR from single location and enables testing of two fibers at the same time using a loopback device

New FiberComplete functionalities:

  • Full bi-dir OTDR management with the M2M communication – now includes exchange of launch and receive cable settings for distant unit minimizing setup time and the risk of errors that might result in poor results or extra site visits for re-test

Just use StrataSync to push the new software directly to your test instruments

New SCU-1800 Firmware v5.0.391 available for download

Posted on

SCU-1800 firmware version 5.0.391 is now available to download via StrataSync’s Firmware update page.

Feature improvements include the addition of configurable login info, HTTPS compatibility, Power Level per Sweep Channel, and selectable TPC to Reverse Telemetry.

Full Release notes can be found here: SCU-1800 Firmware 5.0.391

Note: The SCU-1800 can not be updated directly through StrataSync, but the firmware update file can be downloaded from StrataSync.  This firmware file can then be used to update the SCU-1800 using its typical firmware update procedure, outlined below.

To download the SCU firmware follow these steps:

  • Click on the Assets tab to open the drop down menu
  • Select Update Firmware
  • Ensure the Online updates is selected
  • Choose the SCU from the asset type list
  • Scroll the screen to the right to reveal the firmware download link
  • Click on the download link to begin the download procedure
  • Release notes can be downloaded here as well

To install the SCU firmware onto the SCU:

  • Log into the SCU to be updated
  • Find and click the Settings tab at the top of the SCU’s Home Screen
  • Click Firmware from the menus along the left side of the screen
  • Click on the Choose File under the Firmware Upgrade section
  • Point to the SCU Firmware file downloaded from StrataSync
  • Click the Upgrade Firmware button to begin the firmware update procedure

Updated Software for VIAVI SmartOTDR & T-BERD/MTS Instruments

Posted on

VIAVI have just released updated software for the SmartOTDR, T-BERD/MTS-2000, -4000 V2, -6000A V2 and -8000 V2. These latest software versions include test options and feature enhancements to enable network tests at new speeds and with new capabilities that make testing faster and more efficient. The releases include a number of usability enhancements, these are the main new functional additions:

New base unit functionalities (SmartOTDR, T-BERD/MTS-2000, -4000 V2, -6000A V2, -8000 V2)
• New touchscreen file manager user interface allowing touch & drag for resizing columns & folder selection, plus one touch file/column filtering and file name reveal by touch/hold and drag left/right
• Advanced SmartTest user interface, streamlined and optimized making it easier to read and simpler use
• New handling of demo licenses means a demo/trial license can be requested directly from the instrument (once connected to the cloud)
• Improved OTDR automatic measurement on short distances found in access & wireless networks, as well as for PON configurations

T-BERD/MTS-2000, -4000 V2
New functionalities
• Support for new DWDM Optical Channel Checker module (OCC-4046C) for metro/access DWDM test (e.g. CATV Remote-PHY or 5G back & mid-haul)
• Compatibility mode for FiberComplete HW version 1 and version 2 modules allowing backward compatibility and mixing of HW versions for test
• OTDR option for upgrading FiberComplete Fault finder module to full FiberComplete capability

T-BERD/MTS-8000 V2
New functionalities
• Support for the Optical Spectrum and Correlation Analyzer module (OSCA-710) for in-service OSNR measurements

Just use StrataSync to push the new software directly to your test instruments.

Thanks,
The VIAVI Solutions Team