VIAVI just released updated software for the T-BERD/MTS-8000E, -6000A MSAM & CSAM, the T-BERD/MTS-5800, and the SmartClass 4800. This new software version includes test options and feature enhancements to enable network tests at new speeds and with new capabilities that make testing faster and more efficient.
New Orderable Options:
- 100G Service OAM – test that 100G Carrier Ethernet networks respond properly to control plane traffic such as CCM, LBM/LBR, LTM/LTR, AIS, and RDI messages
- eCPRI – enables testing of the latest x-haul interfaces for 5G wireless networks
No-cost Feature Enhancements:
- One Button CPRI Remote Radio Head Install Test – test MIMO radio configurations with multi-antenna PIM detection and diversity imbalance measurements
- Bidirectional Forwarding Detection (BFD) – easily test Ethernet services through routers using BFD without needing to setup test VLAN’s or disable BFD on the port
- Enhanced Cable Diagnostic Test – revamped graphical interface for CATx cable diagnostic tests with full report generation capabilities
- Job Manager Enhancements – launch and run all tests including SONET/SDH, T1/E1, VoIP, OTDR from the intuitive job manager interface create a single PDF report and optional zip. Create your test plan.
Just use StrataSync to push the new software directly to your test instruments or use the links below to upgrade manually:
- T-BERD/MTS-8000E MSAM, CSAM (v26.1)
- T-BERD/MTS-6000Av2 MSAM & CSAM (v26.1)
- T-BERD/MTS-5800 models 5822P & 5811P (v26.1)
- T-BERD/MTS-5800-100G (v26.1)
- SmartClass-4800 (v26.1)
Please send an e-mail to TAC or contact your local VIAVI Solutions sales representative for more information about these newly released features.