Monthly Archives: October 2017

Updated ONX-580 Firmware – Release Version 7.0.25 for the ONX DSL family is now available

Posted on

ONX Version 7.0.25 is now released and available through StrataSync.

Viavi highly recommends installing the new 7.0.25 firmware on all OneExpert 580A/580/580P units.

Release 7.0.25 is a major step forward for the ONX DSL family with stronger copper test capabilities on the 580P, the ability to automate DSL tests, the WiFi Advisor’s powerful, though simple, SmartChannel Wizard application can now be run natively on the ONX without the need for an external tablet, and automated OneCheck test results can now be seen in StrataSync.

Release highlights include: 

  • Dual Trace TDR on the ONX-580 and ONX-580P
  • NEXT and FEXT on the ONX-580P
  • OneCheck DSL
  • SmartChannel Wizard
  • OneCheck results integrated in StrataSync
  • G.fast/DSL Auto Mode
  • Sckipio GA5 support
  • SpeedCheck over PPPoE
  • OneCheck TDR performance improvements
  • iOS 11 support
  • Italian, French & Portuguese language support

 

Updated ONX Firmware – Release Version 3.6.9 for ONX CATV available now

Posted on

Firmware release 3.6.9 for the OneExpert CATV is now available.

The firmware is available in StrataSync firmware update section for the OneExpert CATV.

Release notes can be found there and here:ONXCBL.003.006.009_Release_Notes

This release includes the addition of a Full Scan test to the QuickCheck Expert mode on ONX-630 and NTX models, allowing a quick toggle from two-channel to full scan analysis. SmartID support is improved to enable wiring tests to 1.6 GHz. This update supports the HomeTDR option, which enables testing drop cables and troubleshooting. Also supported is WiFi Advisor Smart Channel Wizard, which provides an improved user interface for WiFi network optimization and troubleshooting.

Updated Software for T-BERD/MTS-2000, 4000 and SmartOTDR

Posted on

VIAVI just released updated software for its T-BERD/MTS-2000, 4000 & SmartOTDR. This new software version includes test options and feature enhancements to enable network tests at new speeds and with new capabilities that make testing faster and more efficient.

Base Unit Improvements (T-BERD/MTS-2000 & 4000, SmartOTDR):

  • Improved management of the cloud storage disk size information
  • Improved management of internal disk size information when large files are used
  • New Bluetooth management, with new menu
  • Improved display of the IP address in ad-hoc and AP Master modes in connectivity page

Specific to SmartOTDR

  • 5Ghz WiFi dongle management

Specific to T-BERD/MTS-4000

  • Improved USB port type management

OTDR New functions

  • New DWDM OTDR module management
  • New MP2 PON module management
  • CSOR extension files are now transferred to Stratasync
  • New SmartAcquisition function with license

OTDR New functions

  • Improved Management of zoom and cursors in multipulse mode
  • Improved event view management with launch cables (correct launch cable threshold information)
  • Improved management of launch cables for SmartAcq, Optipulse and FTTH-SLM
  • Improved .SOR management for fiber parameters (issue generated by V16.02)
  • Enterprise SLM: addition of default project and label files

Power Meter Improvements

  • Improved dark current referencing management

Scope Improvements

  • Improved management of file saving when storing into USB dongle (issue generated by V16.02)
  • Improved management of the logo for reports

Just use StrataSync to push the new software directly to your test instruments or use the links below to upgrade manually: